SCREW COMPRESSORS SPECIALIST | Customer Satisfaction Is Our Goal | SCS is a WORLDWIDE leader of Screw Compressors
* In Shop Overhaul *Machine Shop In House *Cast Iron Housing Repair *Balancing *Industrial Hard Chrome Rotor and Seal Journal *Industrial Hard Chrome Piston Rod *Laser Alignment *Fast Turn Around Time *OEM Parts *Fast Respond *OEM Paint or Customer Specification *Emergency 24-7 Service *New Compressors *Preventive Maintenance Vibration Analysis Oil Analysis *Remanufactured Compressors *Exchange Program
SCREW COMPRESSORS SPECIALIST "Frick 233 Remanufactured Screw Compressor Repair"
- 233 Reman July 2016 001
- 233 Reman July 2016 002
- 233 Reman July 2016 003
- 233 Reman July 2016 004
- 233 Reman July 2016 005
- 233 Reman July 2016 007
- 233 Reman July 2016 008
- 233 Reman July 2016 009
- 233 Reman July 2016 010
- 233 Reman July 2016 011
- 233 Reman July 2016 013
- 233 Reman July 2016 014
- 233 Reman July 2016 015
- 233 Reman July 2016 016
- 233 Reman July 2016 023
- 233 Reman July 2016 024
SCREW COMPRESSOR SPECIALIST
SCOTT RISTER
8711 Business Circle
Converse, TX 78109
Phone: 210-330-7443
Email: scottr@screwcompressorsspecialist.com
Our Combined 30 Years Experiences Will Assured You That The Work Will Be Done correctly The First Time. Our “Know How” Will Save You Money and Down Time On Unnecessary Repairs. Our Preventative Maintenance Team Will Assure You Of Smooth Operation During The Most Demanding Of Time. Our Service Team Will Work Around The Clock To Complete The Job If Necessary. We supply parts and equipment from the leading manufacturers. “Allow SCS To Prepare Your Quotes For Your Next Machine Needs”
Frick Reman Exchange Program
SCS also offers exchange programs on certain screw compressors, call for more details.
SERVICES OFFERED
Air-Gas compressor repair/overhaul in shop and on site service – laser alignment and vibration analysis. Our works are strictly with in the compressor only-we are not involved in the pressurized or depressurized of the system, high voltage electrical work, confined space entry, handling of any hazardous materials and start and stop of the compressor system.
Screw Compressors Specialist Warranty
Subject to the terms, conditions and limitations set forth, Screw Compressor Service warrants to the Buyer; each overhauled or remanufactured compressor to be free from defects in material and workmanship. SCS’s entire and exclusive obligation and liability, and Buyers sole and exclusive remedy under this warranty, is limited to the repair or replacement, at SCS’s option, free of charge of any part proving defective during the duration of this express warranty period provided below. The obligations of SCS under this warranty shall not include any transportation costs, labor costs, installation costs, or other costs or charges associated with the repair or replacement. This warranty shall not be valid or enforceable if the Buyer is in default in making any contract payments to SCS or fulfilling any conditions of maintenance. The duration of this express warranty is as follows:
12 months from the date of initial operation.
This warranty does not cover failures caused in whole or in part by: improper installation or maintenance; improper use or application; corrosion; normal deterioration; the use or replacement parts or lubricants which do not meet or exceed OEM specifications; or improper repair.
Warranty consideration; Buyer must notify SCS at the earlier of the Buyer’s discovery of the defect or the time at which the Buyer should have discovered the defect; Buyer must immediately return to SCS (freight prepaid) all defective parts.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESSED OR IMPLIED WARRANTIES INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WHICH ARE HEREBY DISCLAIMED. THE OBLIGATION AND LIABILITY OF SCS UNDER THE EXPRESS WARRANTY STATED ABOVE SHALL NOT INCLUDE LIABILITY FOR LOSS OF USE, LOSS OF PROFITS, OR ANY OTHER DIRECT OR INDIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE FAILURE OF ITS PRODUCT OR ANY DEFECT IN THAT PRODUCT OR DELAY IN REMEDYING THE SAME.
IN SHOP OVERHAUL
Our shop is equipped with all necessary tools and equipments - crane, forklift, special tool, etc. Our tear down table has a building oil rail drain to catch all oil drain from compressor during disassembly so there is no oil on the floor that may cause slip and fall. PPE is always available for everyone. Safety training are done year round – safety certifications is required to work in the job site.
Frick 233 Remanufactured Screw Compressor Repair
Engineered and manufactured to meet industrial refrigeration requirements. Designed to assure reliability, accessibility, and ease of service. Compact package allows reduced engine room size and lower construction costs. High stage and booster applications for all common refrigerants. Frick compressors perform at peak efficiency under varying loads and operating conditions. Volumizer Variable Volume Ratio Control adjusts the compressor volume ratio during operation to the most efficient point, depending upon system requirements. This reduces energy waste caused by under- or overcompression. Infinite capacity reduction from 100% to 10% (RWF II) or 25% (RXF) of full load is provided by a slide valve control—one of the most efficient methods of capacity control for screw compressors. Frick compressors allow close system control under widely varying load conditions.
Screw Compressors Specialist also offers a exchange program for the Rotary Screw Compressors. This will eliminate that dreaded down time of waiting for your primary or backup compressor to be repaired. If SCS has your down compressor in stock and your exchanged compressor is in repairable condition you may qualify for this program. Please contact SCS to find out more information about this program.
